The Execs at MatterHackers break down and overview all the brand new and improved tech within the first 3d printer from Ultimaker of their new ‘S’ line of merchandise.
Up to date on October 18, 2022
by
Chris Morgan
The Ultimaker S5 3D printer is the biggest, dual-extruder mannequin obtainable from Ultimaker. Launched in June 2018, the S5 is the primary within the new ‘S’ line of Ultimaker 3D printers, and it boasts a ton of latest and improved options to assist any enterprise obtain wonderful, skilled prints time after time.
MAIN FEATURES
- New 4.7” Touchscreen
- Twin Extrusion
- Absolutely Computerized Mattress Leveling
- Filament Spool Identification
- Filament RunOut Sensor
- Construct Plate Digicam
- Swappable Print Cores
- WiFi Enabled
- Giant Construct Quantity (330x240x300mm)
- Outer Dimensions (457x520x495mm)
- Weight 20.6 kg
- Swappable Construct Plate Surfaces (coming Fall 2018)
TOUCHSCREEN
One of the seen enhancements that comes with the brand new S5 is the 4.7” touchscreen interface. It really works precisely like a cellphone touchscreen – one thing that everybody could be very acquainted with – and is a particular enchancment over the spin-wheels and LCD screens from earlier fashions.
The graphics are extraordinarily crisp and clear. The choices on all menus are simple to learn, and the tutorials are extremely simple to comply with, as they arrive with photos for the consumer to reference on each step. Altering filament, altering print cores, leveling the mattress – the whole lot you must do with this 3D printer is printed in very simple to comply with tutorials. Anybody may simply step up and shortly have a brand new print up and operating on the S5; the interface takes the training curve down fairly a number of notches.
The Model New 4.7″ Touchscreen on the S5
DUAL EXTRUSION
Just like the Ultimaker 3 earlier than it, the Ultimaker S5 makes use of a Print Core system; as a substitute of eradicating nozzles, you swap out the whole hotend, nozzle, heater block, warmth sink, and electronics and swap in one other unit. There are a number of various kinds of Print Cores with completely different inner geometries of fabric capabilities, just like the AA core for construct supplies, the BB core completely for PVA, and the CC core for composite and abrasive filaments. And somewhat than having the 2 print cores mounted degree with one another, the Ultimaker S5 makes use of a lever to carry and decrease the second print core to forestall oozing and smearing of supplies in a twin extruded print job. They’re additionally able to printing virtually any materials, because the print heads can warmth to 280°C, which provides the consumer choices for twin materials prints utilizing nylon, PLA, ABS, TPU, PVA and extra.
Altering filament can also be simpler, because of the discharge lever on the extruder; you now not have to carry a button down with one hand to vary the filament with the opposite. Now you have got two free fingers to vary filament. The Filament RunOut Sensor additionally ensures that in case you run out of filament throughout a print you’ll be able to come again and resume the print proper the place it left off after putting in further filament – no extra misplaced prints!
The twin geared feeder can also be optimized for composite supplies, which is ideal for engineering purposes. The XYZ decision has additionally been barely improved to six.9, 6.9, and a pair of.5 microns attributable to upgrades on the gantry with thicker rods, and a slight gear discount to make it way more inflexible and exact.
Absolutely Computerized and Adaptive Mattress Leveling
The capacitive, lively mattress leveling course of is similar and nonetheless ensures an ideal first layer each time. With the bigger mattress, there are further factors of contact that the S5 measures to make sure higher accuracy for the construct plate general, making certain even bigger prints might be exact and correct.
Construct Quantity
The bigger construct quantity of the S5 permits for extra choices in each single and twin extrusion prints. After getting accomplished the prototyping and testing of single elements, there’s way more room to iterate that greatest mannequin in a number of elements. The entrance ‘barn-doors’ on the S5 additionally assist management the airflow contained in the chamber, permitting simple, secure printing of ABS and different temperature delicate supplies.
Sensible Spool Detection
In case you are utilizing Ultimaker filament, the S5 will robotically detect the filament and modify temperature settings accordingly. If not, the S5 is open to accepting any filament sort from any producer within the 2.85mm diameter. In accordance with the Ultimaker web site, the S5 is optimized for the next supplies:
Construct Digicam and WiFi
The built-in digicam may help you monitor your prints remotely if you must begin a print job and go someplace else. With the Ultimaker app, you can begin and cease prints, get filament runout notifications, and join further printers for workflow optimization. All of this information is communicated wirelessly through WiFi by your community. You may also transmit and obtain information from the printer on to your pc – no hardline USB connection is required you probably have a wi-fi community.
The Constructed-In Digicam
Swappable Print Cores
The S5 comes with two 0.4mm AA cores, and one 0.4mm BB core. The S5 robotically detects which print cores are presently put in, and the touchscreen interface walks you thru the steps of switching them out or putting in a second core when the necessity arises. It takes only a few minutes, and swapping cores doesn’t contain any instruments – it’s all achieved by hand, shortly and simply. Further nozzles and print cores can be found in sizes from 0.25mm to 0.8mm.
Layer decision is great even with a regular 0.4mm nozzle. Ultimaker studies a decision of 20 microns with a 0.4mm nozzle, and our assessments got here extraordinarily near matching that mark.
Swappable Construct Plate Surfaces
On the time of launch, the S5 was shipped with the ever present heated glass construct plate. However beginning within the fall of 2018, Ultimaker might be delivery a further heated aluminum construct plate to present S5 homeowners, and it is going to be included with all new S5 shipments afterward. They’re additionally engaged on providing further surfaces sooner or later, for extra print mattress choices.
As the primary within the line of Ultimaker’s new ‘S’ collection of 3D printers, the S5 stands out as an awesome new addition to an already well-known and dependable producer. From the extraordinarily easy-to-use touchscreen to easy swappable print cores, easy filament choice, loading and altering, to the large construct quantity and skill to community and monitor remotely, the S5 is an superior machine for any workflow.
Please Notice: The Aluminum Construct Plate is presently in growth and at the moment, Ultimaker doesn’t have an anticipated ship date. MatterHackers will replace all product info because it turns into obtainable. We admire your endurance!
